The FMM (Fluid Monitoring Module) has four ports where you can plug in various sensors and accessories (all sold separately). The best part is that they do not need to all be of the same type. This means if you want to have a flow sensor in ports 1 and 2 and then a leak detection probe in ports 3 and 4 – NO PROBLEM! Want a flow sensor for your return pump, an optical sensor for emergency sump level detection, and two leak detection probes, NO PROBLEM! Just plug them in and the FMM will automatically sense which type of sensor you have in each port.
Flow Monitoring: With the various flow monitoring sensors you can monitor the flow inside the pipes of your return pump, emergency drains, reactor pumps, RODI feed, and much more.
Optical Water level Sensing: Attach one to four optical water level sensors and you can detect the rising or falling water levels in such applications as: water level in your sump, a low-water level in your ATO reservoir, a full skimmate waste container, or many other possibilities.
Leak Detection & Stray Water: Plug in up to four leak detection probes and know you have a problem BEFORE it becomes a REAL problem!
Powers Accessories (PMUP, Solenoid Valve): Provide an external 24V power source to the FMM and the DC24 power connector on the FMM can switch on and off devices like our PMUP, Solenoid Valve, or your own
Works With ALL Models: The FMM works with the Apex (2016), Apex Classic, Apex Lite, and Apex Jr. Systems.