Description
System Specifications:
- System dimensions (H x W x D): 160 x 155 x 345 (mm)
- Working Temp.: 5°C – 40°C (41ºF – 104ºF)
- Operating Pressure: 2.8 bar (40 psi) – 6.0 bar (90 psi) If your incoming water pressure is above 4 bar a pressure regulator should be installed.
- Inlet feed water connector: 1/4”
- Flow rate: 100 gallons-per-day
- Typical Rejection Rate: 98% TDS (Total Dissolved Solids)
- TDS (Total Dissolved Solids): < 1800 ppm
Pump Specifications:
- Flow: 0.75 l/min
- Model: TYP-2600
- Max. inlet pressure: 25 psi
- Max. outlet pressure: 80.0 psi
- Dimensions (H x W x L): 25cm x 7cm x 7cm
- Working Current: 0.85A
- Power: 24V/DC
- Transformer Ampage: 2A
What’s Included:
- The RO-100MP is supplied with the following cartridges: PP, CTO
- TYP-2600 100GPD Pump
- FDA approved water filter housings (including o’rings)
- Feed water connector (can be fitted to copper mains water pipe)
- RO membrane element type: RO-1812-100 thin film composite
- Drain saddle valve, spanners for filter and RO housings
- 10″ transparent housing for DI resin chamber
- 630ML MB-115 mixed-bed colour-change DI resin
- 1/4″ tubing for system connection (5 metres)
- 400cc flow restrictor, automatic and manual flush switch
- Automatic shut-off valve
- Instructions manual
